Removal rating 99.99% 10" GPF Glass Fiber Gas Filtration Membrane Filter Cartridge
The GPF series filter cartridge is made of Polytetrafluoroethylene (PTFE) membrane, and the interception efficiency for 0.01μm solid particles is up to 99.99%, so that GPF can meet the most stringent gas filtration. PTFE membrane has natural hydrophobicity and can achieve good filtration efficiency in dry or humid conditions. High flow rate, low pressure drop.
Material Construction
| Filter Media | Ultrafine Glass fiber |
| Support/Drainage | Polypropylene (PP) |
| Cage/Core/End Caps | Core:SS304 or PP |
| Seal Material | EPDM, Silicone, Viton, FEP |
Performance
| Filtration rating | 0.003μm, 0.01μm, 0.1μm, 0.2μm |
| Maximum Operating Temperature | 50℃ (6 Months) |
| Maximum Operating Differential Pressure | 4bar/21℃ 2.4bar/80℃ |
Biological Safety
| Every 10 inches of dissolved matter | ＜30mg |
| Endotoxin | 0.25EU/ml |
Ordering Information
GPF 0001 10 C1 P
| Series | Micron | Length | End Cap Type | Seal Material |
| GPF | 00003 | =0.003μm | 05 | =5" | C1 | =226/Spear | E | =EPDM |
| | 0001 | =0.01μm | 10 | =10" | C3 | =222/Spear | S | =Silicone |
| | 0010 | =0.1μm | 20 | =20" | C5 | =222/Flat | V | =Viton |
| | 0020 | =0.2μm | 30 | =30" | C6 | =226/Flat | P | =FEP |
| | | | 40 | =40" | C9 | =DOE | | |
Company profile:
Shanghai Pullner Filtration Technology Co., Ltd. was established in May 2011 with a registered capital of 26 million yuan. It has a 100,000-level purification workshop of 3,000 m² and a local thousand-level purification laboratory. It is a research and development, production and sales of microporous membrane filtration equipment, filtration system in one of the well-known enterprises.
The company's products are mainly used in Microelectronics, Fine chemicals, New energy, Seawater desalination, Biotech, Latoratory and other fields. Covering Liquid crystal panels, Semiconductor chips, High-purity chemicals, Raw materials, Condensate filtration, Reclaimed water reuse more than a dozen industries.
Other type:
Water single pass test stand
1. Application conditions:
In addition to solid impurities in water or oil. The filter material is preliminarily screened by the general method. At this time, the designer will conduct in-depth analysis and comparison of the appropriate filter material to understand the actual resistance, filtration efficiency, dirt holding capacity and other important parameters of the filter material;
2. Operating parameters:
Experimental standard: EN13443-2
Experimental flow (filter material): 0.5-10L/min
Experimental medium: water
Particle size range: 0.1-80um
Scope of application: It is used for the liquid-solid separation filter element whose medium is water, and the filtration accuracy is greater than or equal to 0.1um.
Product Tags:
|
|
10" GPF / Fiber Gas Filtration Membrane Filter Cartridge Removal Rating 99.99% Images
|
